BUYROSE
Microcurrent Facial Toning Device 2025
Microcurrent Facial Toning Device 2025
Couldn't load pickup availability
Description
Uses advanced technology to lift and tighten facial muscles. Improves skin tone and elasticity.
Maintenance
CARE AND MAINTENANCE
- Always clean the device with a damp cloth after each use.
- This device is not waterproof. Keep safe from water.
- Do not clean with corrosive chemicals or cleaning products.
- Store in a cool, dry place away from steam and dampness.
- Do not use it if the device is damaged.
- Although sturdy, the device will malfunction if dropped or forcefully damaged.
- Do not dismantle, repair, or open the device.
HOW TO CHARGE
- The indicator light will flash when the battery level is low.
- When charging, level indicators will light up. When fully charged, all three level indicators will be lit.
- To prolong battery life, charge from time to time when not in use.
- Unplug the power supply when completely charged.
Safety Precautions and Warnings
WARNING
- Before using this device, remove any metal objects such as earrings, necklaces, bracelets, and piercings.
- Unplug the power supply when charging is completed. Do not use while plugged in.
- Do not dismantle, repair, or open the device.
- Do not use this device on eyes, ears, or mucous membranes.
- Remove glasses and other accessories before use.
- If you have a metal sensitivity, do not apply directly to skin. Cover skin with a sheet mask before use.
- Do not use if you have a wound, eczema, tumor, or other skin disease.
- Keep out of reach of children.
- Do not use if malfunctioning. Contact product manufacturer or distributor.
Microcurrent Facial Toning Device | Lift & Tone
How to Use
PREPARATION BEFORE TREATMENT
- Remove makeup before beginning treatment.
- Always apply water-soluble skincare products to the face before using the device. This will help the conductivity of the device and maximize its effects.
- Reapply water-soluble skincare product regularly during use to avoid experiencing dryness or discomfort.
- Clean dirt, makeup, or debris regularly with a soft, wet cloth.
- Do not use near or on eyes or ears.
HOW TO USE
- Cleansing
Use to unclog pores and remove dirt and residue.
- Wash your face. Saturate a cotton swab with your preferred lotion-based skin cleansing or exfoliating product, insert it into the Makeup Cotton Ring, and attach the ring to the massage head. Do not use milky or gel-like products
- Ensure the cotton swab is fully saturated from front to back.
- Press the power switch and adjust to “Cleansing” mode.
- Press the level switch to select your level — “High,” “Medium,” or “”
- Hold the device with your hand touching the ion sensor on two sides.
- Apply saturated cotton to the skin and move slowly to cleanse the face and neck areas.
Notes:
- For best results, use a lotion-based cleanser. Thinner, water-based products may provide a poor result.
- Ensure you are touching the sensor while applying the cotton to skin or it will not vibrate.
- Micro-pat
Use to effectively stimulate and loosen skin to allow optimum absorption of moisturizing ingredients.
- Evenly smooth facial moisturizing lotion over your entire face.
- Press the power switch and adjust to “Micro-pat” mode.
- Press the level switch to select your level — “High,” “Medium,” or “”
- Hold the device with your hand touching the ion sensor on two sides.
- Apply the head directly to the skin and move slowly to infuse moisturizer.
Note: This mode works best when using a high-moisture content lotion, the cotton swab is not needed.
- Warm Skin
Use to refresh skin with fine vibrations and gentle microcurrents.
- Apply a sheet mask or evenly smooth facial moisturizing lotion over your entire face.
- Press the power switch and adjust to “Warm Skin” mode.
- Press the level switch to select your level — “High,” “Medium,” or “”
- Hold the device with your hand touching the ion sensor on two sides.
- Apply the head to the sheet mask or directly to the skin and move slowly to infuse moisturizer.
Notes:
- Treat skin for 4 minutes for each mode.
- After 4 minutes have elapsed, the device will stop and automatically power off if not used for another 4 minutes.
- Continue to add moisturizer to the cotton if the device becomes dry or difficult to glide across skin.
- Ensure you are touching the sensor while applying the cotton to skin or it will not vibrate.
- If the head is not vibrating, the device is not working.
- Do not apply the device to the same area of skin for more than 10 seconds. The galvanic current may create a light stinging effect when in use.
- Discard cotton after each use.
Recommended treatment: Gently glide the device using a circular motion from inside to outside of the face and from bottom to top of the face.
Quick Treatment (4 minutes)
Refresh your skin quickly with a 4-minute refresh.
One Step: Press the “Warm” mode button, apply moisturizer directly to the skin, and massage for 4 minutes. Recommended use: once daily.
Easy Treatment (8 minutes)
Cleanse and refresh your skin quickly in 8 minutes.
Step 1: Press the “Cleansing” mode button, apply cleansing product to cotton, and massage for 4 minutes.
Step 2: Press the “Warm” mode button, apply moisturizer directly to the skin, and massage for 4 minutes.
Recommended use: 4-5 times each week.
Comprehensive Treatment
Cleanse refresh, and deeply moisturize your skin in 12 minutes.
Step 1: Press the “Cleansing” mode button, apply cleansing product to cotton, and massage for 4 minutes.
Step 2: Press the “Micro-pat” mode button, apply moisturizer directly to the skin, and massage for 4 minutes to loosen and prep the skin for deep moisturization.
Step 2: Press the “Warm” mode button, apply moisturizer directly to the skin, and massage for 4 minutes.
Recommended use: 3-4 times each week.
